Hi all.. new user on here but was 'calrio ' on the other site..
My daily ride which is a rover 25 diesel mk2 seems to have a slight issue.. indicators dont work!
I cant seem to see a relay for it but i also read somewhere they have something called a ' bcu ' unit.
My question is.. if it does have a bcu unit.. is it coded to the ecu or can i just swap it for another unit and all hunky dory?
Pardon my thickness... i can rebuild everything on a metro but dont know much about the r25... any help would be greatly appreciated
Anyone good with rover 25's?
-
- Posts: 49
- Joined: Thu Mar 16, 2017 5:19 pm
Re: Anyone good with rover 25's?
the BCU is coded and is basically a more complex 5as alarm box. The BCU is on the later Rover 25 from about late 2003 to 2005. I think the key fob is round too instead of the normal 5as fox which the rover 100 had. I believe the BCU is behind the centre console / gearstick area.
Do you have any photos of your rover 25 and also of its key fob?
Hope this helps.
Do you have any photos of your rover 25 and also of its key fob?
Hope this helps.
Re: Anyone good with rover 25's?
the 5as box in the 2002 rover 25 I disassembled the other day was all the way in the corner up under the dash behind the fuse box.
'84 Mk1 Hill Climb Metro
'93 Rover 114GTI
'89 Austin Metro Special 998
'99 Rover 400 - sold
'02 Rover 75 cdti tourer
'85 MG Metro
'93 Rover 114GTI
'89 Austin Metro Special 998
'99 Rover 400 - sold
'02 Rover 75 cdti tourer
'85 MG Metro
Re: Anyone good with rover 25's?
Hi.. yeah it a round fob on a mk2 facelift rover 25 diesel. Its a 54 plate.. iv noticed now front fogs have also stopped working.
Seen a chap who sells the pektron relays on ebay at 5 for £20 to solder in ,so i think thats my only option rather than getting a new ecu set?
Seen a chap who sells the pektron relays on ebay at 5 for £20 to solder in ,so i think thats my only option rather than getting a new ecu set?