Hello all,
My metro has come back from the body shop after having some welding done...
the car is in a bit of a mess..
The chap has cut the wiring loom where the loom passes from the sill trim into the side of the car and over the wheel arch to reach the back.
I am OK soldering it all back together - however if I lay the loom out along the sill - I have a branch that goes to the hand brake switch and the fuel tank. There is another two pin plug -in the rear foot well is located that has an orange and pink wire- where does that go ? any ideas?
cheers
Shaun
Cable connector
Re: Cable connector
Hi, this might be a bit late, but it sounds like you have a 3 door, if so the plug is for the 5 door
central locking motor, Rover used the 5 door looms on 3 and 5 door as you simply dont use
the 'spare' plugs on the 3 door.
central locking motor, Rover used the 5 door looms on 3 and 5 door as you simply dont use
the 'spare' plugs on the 3 door.