Its probably the module on the side of the distributor, they're known for failing, also check the resister wire to the dizzy, should be around 9 volts, its the white/pink wire with 'Resister' printed along its length, it gets warm when its on. Check you have 12v on the wire from the starter solenoid...

VVC 143 bhp ecu, MGF loom matching alarm with 2 fobs and MFU unit, loom needs converting to suit Metro or R100. £50, Diesel Rad with 2 fans, top mounting + Rad bleed extension to connect to header tank, ideal for vvc conversion. £40. R100 car loom £30. R65 gearbox drive shafts pair, £30. New VVC pis...

Hi, sorry, it went into the scrap, I needed the garage space, pity as it was ok,

VVC 143 bhp ecu, MGF loom matching alarm with 2 fobs and MFU unit, loom needs converting to suit Metro or R100. £50, Diesel Radiator with 2 fans, top mounting and Rad bleed extension to connect to header tank, ideal for vvc conversion. £40. R100 car loom £30. R65 gearbox drive shafts pair, £30. Metr...

Why dont you fit the Maplin central locking kit, the CDL motors are far superior to the Rover ones.

Thanks for the reply!!! So as far as charcoal can i don't think i have one connected or even present in the engine bay, I am indeed running cable speedo, I'm guessing as i have aftermarket exhaust i dont have a post cat sensor The black plug is connected but i think the connector is loose as when i...

Hi all, So firstly i would like to appologise for the (possibly) long post. I have bought my self a lovely Rover 100 with 1.8 VVC 160 mems3 conversion however i have been coming up against a lot of issues. Firstly the VVC mechs i think are stuck. I am getting the limiter come in at around 5,500rpm ...

VVC 143 bhp ecu, MGF loom matching alarm with 2 fobs and MFU unit, loom needs converting to suit Metro or R100. £50, Brand new 1800 crankshaft with new rear oil seal, £100. Diesel Radiator with 2 fans, top mounting and Rad bleed extension to connect to header tank, ideal for vvc conversion. £40. Met...

If your ecu recognises the later 36-4, then you can fit the 1.6 flywheel and clutch, If it only recognises the earlier rover 36-2 then you can fit that 1.4 flywheel and still fit a 1.6 clutch plate and cover as the clutch fitment is the same, indeed MG standardised the 1.4 and 1.6 flywheel around th...

Hello again i am fitting a vcc 143 to metro ad i have two large brown wires on the MFU Do they go to the 30amp under bonnet fuse or battery or somewhere else . Yes, they go to the 30A under bonnet fuse, although you should uprate it to 40A due to the extra stuff on a vvc engine that operates, ie, v...